MONTO

MONTO

MATTRESS WITH POCKETED CORE

MORE THAN A MATTRESS

Mattress of supreme class that comes with an additional element that can optionally be removed offers the a double pleasure to the user, as it adapts to his or hers needs and wishes. The 29cm height offers an increased feeling of comfort and a greater level of anatomic support. The system of pocketed springs is adapting to the body in all the key points and distributes the pressure along the mattress, while the spine takes the correct position. Monto is an ideal choice for all of those who are looking for supreme comfort and value the everyday, quality relaxation and full rest.

FEATURES

- height of mattress: 29 cm

- mattress with an additional removable element

- combination of pocketed springs and PU foam

- anatomic support

- airy 3D stripe for better air flow

- PU foam reinforcements

CORE

The springs in the pocket made of patented steel wire thickness of 1.8 mm, both sides PU foam with S-35 kg/m³. The core of the mattress on the sides further reinforced steel HVT elastic tape and PU foam with S-25 kg/m³. Additional futon stuffed with - PU foam with S-35 kg/m³.

COVER

Fabric Cvilih Brokar K04, cover in two parts (the mattress and additional futon) konflin 200 g/m², foamed material foil So 25 kg/m³, nonwovens 17 g/m².

TECHNICAL DETAILS

Slika preseka

STRUCTURE

1. Final fabric

2. Additional futon - PU foam with S-35 kg/m³

3. Mattress - PU foam with S-35 kg/m³

4. Springs in the pocket

5. Reinforcements made of PU foam with S-25 kg/m³

6. 3D strips

  • Bed’s lining on which the mattress is placed should be perforated so that air can circulate continuously around the mattress and keep it well ventilated.
  • The mattress and bed base must be properly installed. Incorrect installation can damage the mattress.
  • In use and during transport the mattress must not be folded and wrapped while rotating .
  • Jumping on the mattress is highly forbidden.
  • Svaki dušek ima svoje uputstvo za održavanje kojeg se treba pridržavati.
  • For the purpose of ventilation and equal load of the upper and lower part of the mattress be sure to rotate the mattress once a month in the direction of headboard-footboard, face sides. Handrails on the mattress are used for positioning, not carrying the mattress.
  • Often airing of bedroom and mattresses (without bedding or any other protection) will prevent the accumulation of moisture due to perspiration, odor, dirt and other things.
  • When using the mattress be sure to protect it with blanket, bed sheets, waterproof cover or additional futon. Maintaining proper hygiene prolongs the life of the mattress.
  • Keep your mattress always clean. It is best to vacuum it from time to time with regular vacuum cleaner to remove dust. To avoid damage of the mattress do not use vacuum cleaners of high suction power and steam devices.
  • The mattress must not be moistened with water or some other liquid. However, if the cleaning is needed, and the cover is not self-removed, apply foam of a mild soap on the stained area using a wet mop or sponge, and then wipe the cleaned area with a dry mop. The wiped spot should be dried on an aerated place, never next to some source of heat or sun.
TIPS FOR USE AND MAINTENANCE OF MATTRESS

REMARK

Dimensions, technical characteristics and prices of the product are based on informations available at the moment of notification. Please re-check all informations at our closest shop.

Piktogram
PICTOGRAM LEGEND
Skica
SIZES
190x80 (90,100,140,160,180) cm
200x80 (90,100,140 160,180) cm
* Ability to produce in other sizes on request.
to TOP

TOP

SOCIAL NETWORKS